Category: Uncategorized
Uncategorized
Showing 13–24 of 25 results
-
Fuel Tank Gauges Compatible with Generac Generator – Fuel Level Meters Fit for Hon da GX160 GX270 GX390 Engine, 2KW 2.5KW 3KW 5KW 168F 173F 177F 182F 188F 190F China Gasoline Generator, 2 Pack
$7.99Add to cart- Application: The fuel level gauge are ideal for Generac, Coleman Powermate, Hon da, Dek, Sportsman, Eaton, Pepboys, etc engines and generators.
- Compatible with: The fuel level indicator is compatible with ① Hon da GX160, GX270, GX390 engines, ② 2KW, 2.5KW, 3KW, 5KW, 6.5KW, 7KW, 8KW, 173F, 177F, 182F, 188F, 190F China gasoline generators, ③ 178F, 178FA, 186F, 186FA diesel generators.
- Replace Part Numbers: Hon da 17630-Z22-010, 17630-Z22-020. Please measure your original fuel gauge size and make a cross reference to see if this part will fit your model before purchase.
- Easy Installation: Put the square fuel gauge in place and tighten the screws with screwdriver or screw gun.
- Package Includes: 2 fuel meter gauges with rubber gaskets and windows. With float shaft length: 3.43″, overall width 1.18″, overall length: 3″, center to center: 2.36″. Please check the detail measurements in the picture.
-
Replacement 951-14628 Air Filter Compatible with Craftsman Mower – Paper Air Filter Compatible with Troy Bilt 105 Lawn Mower, Craftsman 247 Walk Behind Mower, MTD Remington Gas Mower with 140cc Engine
$14.99Add to cartAbout this item
- 1. The air filter is compatible with ①Craftsman 247.762662(25B-55SD799) 140cc engine edger ②Troy Bilt TB105, TB115, TB170 lawnmower ③MTD Remington RM110(11A-A0MA883), RM130(11A-A2SD883) trail blazer with 140cc OHV engine. Please use the part number and description to see if the air filter will fit on.
- 2. Air filter replaces OEM part numbers: MTD 951-14628, 951-14628A, 751-14628, 751-14628A, 490-200-M057.
- 3. More surface area for particle capture is provided by pleated paper in a zig-zag shape.
- 4. Without using any tools, you just have to twist off the lid and replace the air filter.
- 5. Package includes:2 air filter (outer diameter 3-1/2″, inner diameter 2-3/7″, height 1-1/5″, weight 0.11 lbs).
-
1.5” x 59” Pool Hoses Compatible with Intex Pool Skimmer Surface Pump Filter, Pump Hoses Tubes for Above Ground Pool Sand Filter, 3 Packs with 6 Hose Clamps
$11.49Add to cartAbout this item
- 1. The universal pool hose is ideal for Intex, Summer Waves, Coleman, and other above ground pools, surface skimmers, pool skimmers, pool pumps, pool filters, pool wall outlet that use 1 1/2″ diameter hoses.
- 2. The pump hose is in translucent frosted white and corrugated design and allows you to observe the flow and blockage of water in the hose.
- 3. The filter hose is made of durable PE material, flexible and leak-proof, making the installation process go easier and faster. Replacing a new pool hose enables your current application to work like a new one.
- 4. Inside diameter: 1.5″, outside diameter: 1.65″, length: 59″. Please verify and measure your original hose size to ensure this hose will fit your current application before ordering.
- 5. The package includes 3 replacement pool hoses and 6 metal hose clamps. If necessary, secure the hose with metal clamps, very easy to install with a screwdriver and pliers.
-
CH751 Keys Fit for Storage Compartment Lock – Spare Keys for RV Campers Storage Door Locks T-Handles Pickup Shells Tool Boxes Camper Toppers, Camper Shells, Truck Caps
$6.39Add to cart- Application: 60 percent of all storage compartments found in today’s RVs have the same CH751 key. So, the key can be widely used on CH751 locks of the t-handle, storage compartment, storage locker, RV, pop-up camper, pickup shell, side box, toolbox, display case, cart, baggage door, truck cap, controller cover, boat, motorhome, fifth-wheels, etc.
- Compatible with: Various aforementioned products’ locks from Jayco, Rainbird, Sentry, Thule, Master, Leer, Hillman, Hyoko, Ilco, Grainger, Southco, Spectrum, Hunter, Rainbird, Bauer, Pyramid, Midland, Wilkinson, Oswald, Acme, Ace, Century, Chutes International, Cutler, Hi-Rise, Valiant, etc. Recommend buying them as spare backup keys.
- Replacement Part Number: CH751. The “CH” here means “Common Hardware”, so the key CH 751 is a universal key. NOTE: Please check your lock or key bow inscribed with the part number. CH751 key matches CH751 lock.
- Package Includes: camper keys x 5, key chain x 1. Made of stainless steel.
- Size: 1-6/7″ x 4/5″
-
Deck Belt Replacement GX21833 GX20571 Fit for John Dee re Mower – 141 1/8 Mower Belt Compatible with JD D140 D150 D160 L120 L130 LA145 LA165 E140 E170 155C 48 Deck Lawn Tractor and Riding Mower
$13.99Add to cartAbout this item
- Mower belt fits for John Dee re JD 48″ cut lawn mower: ①100 series: 145, 155C ②D100 series: D140, D155, D160 ③E100 series: E140, E150, E160, E170 ④L100 series: L120-ST650238, ST904069; L130-ST646171(SN A130001-, B020001-), ST650238, ST904069 ⑤LA100 series: LA 130, LA140, LA145, LA155, LA165 ⑥X100 series: X140, X165, X166, etc.
- Deck belt replace OEM part numbers: ①John Dee re JD GX21833, GX20571 ②Oregon 75-800, 175-800 ③Others: Rotary 12461, Napa 7-078277, Surefit 504-00324.
- Deck belt replace OEM part numbers: ①John Dee re JD GX21833, GX20571 ②Oregon 75-800, 175-800 ③Others: Rotary 12461, Napa 7-078277, Surefit 504-00324.
- Before installing the new deck belt, please remove the spring locking pins and washers with pliers, pop the arm linkages, remove two pulley covers (if any), the belt bracket, and loosen the sheaves. Taking a snapshot of the old belt also aids in getting the replacement belt properly routed.
- Package includes: 1 mower belt, width 1/2″ (0.51″), length 141 1/8″ (141.1″) , weight 7/8 lbs, thickness 1/3″ (0.33″)
-
Replacement 00009890516 Fuel Line Grommets for Stihl Weed Eater – Fuel Line Tank Grommets Compatible with Stihl FS52 FS56 FC75 FS66 FS74 FS75 FS76 FS80 FS85 BG75 HT75 KM85 String Trimmer, 10 Pack
$7.99Add to cart- Application: The fuel line grommets are placed into the fuel tank. Fuel will leak from the tank due to a worn fuel line grommet. It is also recommended to replace the fuel lines at the same time as the grommets.
- Compatible with: The fuel grommet kit is compatible with Stihl BG72, BG75, BR320, BR340, FC75, FC85, FS52, FS56, FS66, FS74, FS75, FS76, FS80, FS85, FS86, SR320, SR340, etc weed whackers.
- Replace Part Numbers: 00009890516, 0000-989-0516, 0000 989 0516. Please compare these parts with your original one to see if these grommets will fit your model before purchase.
- Size: Height: 1/2″, hole diameter: 1/5″, overall diameter: 1/2″. Please check the detail measurements in the picture.
- Package Includes: 10 fuel line tank grommets.
-
Fuel Filter RP080026 Compatible with PCM Engine – FCC Fuel Water Separator Element Compatible with Crusader MP 5.0 5.7 6.0L EFI Engine with Canister, Pleasurecraft 5.0L 5.7L V8 GM Marine Engine
$24.99Add to cartAbout this item
- Application: The fuel filter with fuel control cell canister helps to remove contaminants, such as dirt, dust, debris and rust particles from the fuel, to protect the vital parts of the engine.
- Compatible with: The fuel water separator element is compatible with Nautique boats, Crusader and Pleasurecraft marine engines, EFI PCM engines starting in mid 1996 equipped with a fuel control cell.
- Replace Part Numbers: Fuel filter: RP080026, R080026. O-rings: R047214, R014241. Please check your original part number to see if this part will fit your model before purchase.
- Material: The oil water separator is made of premium ABS material. It is recommended to replace the filter at least once a year for peak performance.
- Package Included: 1 fuel control cell fuel filter, 1 larger o-ring (old style), 2 smaller o-rings (new style). With total height (including fin): 3.88″, diameter: 2.89″
-
Fuel Filter 18-7866 Replacement for Yamaha Engine – 10 Micron Fuel Water Separator Filter Compatible with Yamaha 2 & 4 Stroke Outboard Engines F150, Replace MAR-FUELF-IL-TR, MAR-10MEL-00-00, 9-37807
$15.99Add to cartAbout this item
- Application: The fuel water separator filter is used to remove water and particulate contaminants from the fuel before it reaches the fuel pump. First in the line of defense against ethanol fuels.
- Compatibility: Most Yamaha 2-Stroke & 4-Stroke engines, such as F150. NOTE: Models of 115 hp or less do NOT fit on!
- Replacement Part Number: 18-7866, MAR-FUELF-IL-TR, MAR-10MEL-00-00, 9-37807. Please verify your part number before you place an order.
- Package Includes: 10-Micron filter x 1.
- Size: Outside diameter: 3.73″, height: 6.06″, thread hole diameter: 0.63″, thread pitch: 11/16-16. In case of manual measurement error, please refer to the physical product.
-
Replacement 6K8-24560-21-00 Fuel Filter 2PCS for Yamaha Jet Ski – Filter Assembly Compatible with Yamaha WaveRunner GP760 WR650, WaveVenture WVT1100, WaveRaider, Super Jet Water Craft
$8.55Add to cartAbout this item
- Application: The PWC personal water craft gas fuel filter assembly is in a filter line to screen out contaminants to maximize engine efficiency.
- Fuel Filters Fit Moldels: Yamaha ① WaveRunner FX-1 FX700, GP760, GP800, GP1200, WR500, WR650, WR700, XL700, XL760, XL1200 ② WaveRaider RA700, RA760, RA1100 ③ WaveVenture WVT700, WVT760, WVT1100 ④ WaveJammer WJ500 ⑤ WaveBlaster WB700, WB760 ⑥ Super Jet SJ650, SJ700. For more details, please check the product description.
- Replacement Part Number: 6K8-24560-21-00, 6K8-24560-10-00, 6K8-24560-00-00, 6K8245602100, 6K8245601000, 6K8245600000, WSM 006-540.
- Package Includes: Fuel filter x 2. Made of plastic.
- Size: 3.57″x2.29″x0.67″0.67″. In case of a manual measurement error, please refer to the physical product.
-
Ignition Keys for JD Hitachi Excavator – AT194969 Excavator Ignition Key for JD Hitachi Tractor Case Dozer New Holland Fiat Construction Equipment, Replace H800 AT147803 4286465, 5 Pcs
$7.99Add to cartAbout this item
- This ignition key is for JD, Hitachi, Case dozers and some New Holland Fiat excavator and other construction equipment.
- This key works on below: JD compact excavators, excavators, loggers & forestry equipment, loaders, wheeled excavators. Hitachi excavators, graders, dozers, rollers, skid-steers, dumpers. Case dozers 1605 & 1850K. New Holland dozers 1605 & 1850K. And some Fiat equipment. For more models, please refer to the description part.
- Replacement part of the JD excavator key is AT194969, H800, AT147803, 4286465.
- They are durable and reliable, meet the professional specification.
- Package inculding 5 x JD excavator keys (2.39″ length), and 1x key ring , easy for carrying.
-
Cat Keys for Caterpillar Excavator – 5P8500 Ignition Keys for Caterpillar Excavator Loader Dozer Backhoe Skidder Skid Steer Loader Graders, Excavator Keys for Cat Caterpillar Heavy Equipment
$6.99Add to cartAbout this item
- These cat keys are designed for turning on the ignition of most caterpillar heavy equipment, fit perfectly with cat locks.
- The caterpillar keys work well on excavator, loader, dozer, backhoe, graders, skidder, skid steer loader, front loader, compactor, dump trucks, etc. And also work on cab doors, side panels and padlocks.
- Replacement part number of the key is 5P8500, fit for caterpillar excavator 980k 980h 416c 248b 262d 247b 287b 313f 0964753 0966198 8V4404 9G2777 ect. For more models, please refer to the description part.
- They are standardized and reliable to use, work like the original.
- Package including 5 x cat keys (2.7inch length), and 1 x key ring and 1 x chain as gift, easy for carrying.
-
Ignition Switch 925-04228 Fit for Cub Cad et Mower – 3 Position Key Switch Compatible with Cad RZT-42 RZT-50 RZT-54 Riding Mower, Troy-Bilt Mustang XP 42 50 54 Zero Turn Mower, Replace 725-04228
$12.99Add to cartAbout this item
- 1. The ignition starter switch is compatible with ①Cub Cad et RZT-17, RZT-L42, RZT-L46, RZT-L50, RZT-L54, Tank L-48, Tank L-54, Tank L-60, Z-Force L48, Z-Force L54, Z-Force L60, ②Troy-Bilt Colt XP, Mustang 42 XP, 46 XP, 50 XP, 54 XP, Z42, Mustang Z46, ③Craftsman Z6000, Z6400, Z6600, ZTL7000, ZTL8000, ④JD 1023E, 1025R, 1026R, 3032E, etc lawn mower.
- 2. Replaces OEM part numbers ①Cub Cad et/MTD/Troy-Bilt 725-04228, 925-04228, ②JD AM13359, AM133596, AM122881, AM132808, ③AYP/Roper/Sears/Craftsman 175567, AYP/HU/Craftsman 583070001, ④Others: Bad Boy 077-8076-00, Delta 6900-37M, etc. Please check the original part number and make sure this part fit your model before purchase.
- 3. The generic ignition switch is ideal for many different brands of mowers with 3 positions and 5 terminals. The positions from left to right (turning key clockwise) refer to stop, run/on and crank.
- 4. The mower key switch is in plug and play design for easier installation. First disconnect the wire connector, then remove the old switch from the housing. Connect the wire connector to the new ignition switch, align the switch on the steering housing and snap it into place.
- 5. The package includes 1 ignition switch, 2 keys, 1 free carabiner.
